Ilmailufoorumi
Kauppapaikka => Experimental/Ultrakevyt/yleisilmailu -aiheisia kaupallisia tiedotteita => Aiheen aloitti: meglin - kesäkuu 17, 2016, 12:29:59
Muotolevyihin pyörät 100 ja 400 * 400 * 150 mm.
Kölin kanssa ja ilman köli.
Korkea laatu, kevyt. 60 ja $ 100: lla.
Myös pyörä muotosuojia Cessna lentokoneita, RVS ja Sportstar.
Ne ovat noin puolet vahvempi ja puoli kertaa parempi kuin alkuperäinen.
Nokkapyörä fairing Cessna arvoltaan $ 180, pääasiassa pyörän tuulisuojan - $ 190.
We make wheel fairings on Cessna-172.
The cost of one set - $ 550 (fiberglass) - 3 pieces (the two main (6.00*6) and one bow (5.00*5)).
The cost of one set - $ 900 (Carbon) - 3 pieces (the two main (6.00*6) and one bow (5.00*5)).
Weight of fiberglass fairing 1300 g (main), 1000 g (the bow).
The weight of carbon fiber fairing 1000 g (base), 800 g (bow).
On the fairing has a hatch to swap wheels and interior partitions.
Production of wheel fairings on the RV-6
The cost of one set of $440 (fiberglass) - 2 pcs (main wheels 5.00*5)
The cost of one set of $750 (Carbon) - 2 pcs (main wheels 5.00*5)
Weight of fiberglass fairing 900 g
The weight of carbon fiber fairing 700 g
On the fairing has a hatch to swap wheels and interior partitions.
Composition (base) - certified epoxy for aviation name of Epoxy 619 and the structural fabric of the T-10 (14). The method of vacuum forming and heat setting. They are light and strong, not afraid of blows, falling stones and walked on them. Caulking is not used. Guaranteed operation 3000 thousands of flight (about 5 years of active use) and post-warranty service. Product Data Sheet attached. The passport shows all performance characteristics.
All fairings are covered with soil and are ready for painting.
Manufacturing - within 15 working days from the date of payment. Sending at EMS.
Sending is about 7-10 business days.
Jatkamme tuottaa pyörän muotosuojukset valmistettu lasikuidusta (epoksi hartsi) kevyiden ilma-alusten, trikes, gyroplanes.